The atomizer is the tank where the juices is inserted and is connected to the battery of the electronic cigarette. Inside, immersed in the juices, there is the head (coil or resistance) which, by heating up through the energy supplied by the battery, manages to vaporize the juices . When we inhale through the drip tip (or mouthpiece) the vapor is mixed with the flow of air and inhaled to the user. Simple!
As mentioned before, different types of atomizers for electronic cigarettes have been put on the market, for example with airflow from below or from above, with refill from below or from above, with the tank in glass, plastic or metal. and much more. In essence, however, the functioning is the same for everyone best cbd vape juice.
Now we will go into the specifics of the key components:
Inside an atomizer the head is its main component, also called “coil” (in English: “coil”, because it often contains kanthal coils).
What are the holes in the heads for?
The e-juices is absorbed by the cotton thanks to the holes on the side.
The larger the holes, the greater the head’s ability to absorb juices .
It is good to use cloud chasing vape juices (i.e. high VG vape juices) with heads that have very large feed holes.
What is the Electronic Cigarette Coil
The head inside has two main components:
a metal material (generally Kanthal A1), wound in coils called Coil , which is heated thanks to the passage of electric current (in the photo, however, we see a resistance to mesh or metal mesh).
a material that absorbs juices , usually pure cotton .
As the coil (or the mesh) is heated, it vaporizes the juices found in the cotton.
Electrical connection of an atomizer head.
At the base of the head there is the contact with the battery which generates the energy necessary to heat the resistance.
The current used to heat the head is of the “continuous” type, usually between 3 and 5v depending on the setting . Direct current uses a positive and a negative pole (+ and -, like a battery for the remote control).
At the base of the cartridge we have the positive pole in the center , and separated by a thick rubber insulator , and the negative pole (represented by the entire body of the cartridge). The ends of the metal material (poles) are interlocked by the insulator and the central pole.